How To Stop on A Longboard or How To Turn On A Skateboard
Learning how to ride a longboard or a skateboard can deliver an exciting experience to you. You will fall in love with what comes along with it. The longboard provides more stability when compared to a skateboard. However, people who are interested in getting more agility prefer to invest their money to buy skateboards.
The process that you have to follow in order to learn how to ride a longboard or a skateboard is quite similar. We thought of sharing the process along with you. Any beginner will be able to follow these steps and learn how to get started with. You will be impressed with the results that it can deliver to you as well.
What items do you need to learn how to ride a longboard or skateboard?
Before you start learning how to ride a longboard or skateboard, you will need to get hold of certain items. They can contribute towards the overall experience that you can secure, as well as the safety that you can maintain while riding. Therefore, you are strongly encouraged to invest on them before you start riding the longboard or skateboard.
Some of the important items that you should get include pads, a helmet and appropriate shoes. Once you have them, you will be able to get started with riding the longboard or skateboard.
Understanding the difference between longboards and skateboards
It is also better if you can have a basic understanding about the difference that exists between longboards and skateboards. Then you can figure out what you should be purchased depending on your preferences and the experience that you wish to end up with.
The biggest difference that you can find in longboards and skateboards is the length. Longboards are relatively lengthier when compared to the skateboard. Apart from this, longboards are widely being used for carving hills and cruising streets. However, people often tend to use skateboards for performing kicks, jumps and other tricks.
On average, a longboard is about 42-inches in length. However, you can find shorter versions as well. A shorter longboard would be around 34-inches in length. The width of a longboard varies in between 7 inches and 10 inches. It depends on the shoe side of the rider as well. However, 8.5-inch is the most common width that you can discover in longboards.
This table will give more details about the differences
|Longboard||Easy to maneuver|
Easy to learn
Difficult to do tricks
|Skateboard||Convenient to carry|
Small and light in weight affordable for beginners
|Easy to do tricks|
The skateboards are usually 30 to 33 inches in length. They have got asymmetrical head and tail.
Whether you purchase a longboard or a skateboard, you need to purchase appropriate shoes, which will be able to contribute towards the level of stability that you can achieve.
How to ride a longboard or skateboard?
Now you are aware of all the background information that is needed to get started off. While keeping that in mind, let’s take a look at the steps on how to ride a longboard or skateboard. In order to make life easy for you, we thought of sharing step by step instructions that you can follow.
Regular stance or goofy
You will be able to use two different stances while you are riding the longboard or skateboard. They include regular stance and goofy. The regular stance is where you keep the left foot forward. On the other hand, you keep the right foot forward with a goofy stance.
The foot that you keep on the front will be able to help you with achieving balance. Therefore, it is important to determine what foot you are going to place in the front. On the other hand, the rear foot will be the one that you are going to use to kick you forward. Depending on the capabilities and preferences, you can determine what your kicking foot should be. You will be using that to push yourself against the pavement. Along with that, you can also determine what your front foot should be.
You should always keep in mind that there is no right way to ride a longboard or skateboard. Therefore, you can make any opt-out of these two, based on the preferences that you have.
Practice the stance
Once you identify your stance, you need to go ahead with practicing the stance. You should select a flat and a smooth surface for that. The place you pick should be free from traffic as well.
You need to stand at the center of the longboard or skateboard. Then you will be able to get a sparing feel about your longboard or skateboard. While remaining in that position, you should bend the knees and crouch down. Then you should stand up. You should get used to moving your feet along the deck of longboard or skateboard. This will provide you with the chance to refrain from stepping off from it.
The placement of foot depends entirely on how you are riding the longboard or skateboard. In most of instances, you want to keep the feet in between the trucks. They should be placed at a width, which is quite wider when compared to the shoulder width. The front foot out of the two should be placed diagonally at a degree of 45. Then you should keep the rear foot pointed out by a few degrees.
Pushing off the longboard or skateboard
After determining the stance, you will be able to get started with pushing off the longboard or skateboard. This is where you need to take your back foot away from the longboard or skateboard and place it on top of the ground. In order to start moving, you can simply push it with the help of your foot. You will be able to push it a few times. Along with that, you will be able to get the speed that you want to get. Or else, you can even go for a bigger push and get the speed you want immediately. You can go for any approach out of these two, depending on the preferences that you have.
When you start moving the longboard or skateboard, you can lift the back foot and keep it on the board. You will be tempted to push with your front foot because it may seem comfortable. You can do it as well. However, it is better if you can use the rear foot to keep you pushing forward. People who use their front foot for pushing will be following the technique called pushing Mongo.
You are encouraged to practice on a flat and a smooth surface until you are comfortable with riding your longboard or skateboard. Then you will be able to go ahead with practicing on a downhill. You should locate a slightly steep slope for it. You need to make sure that it doesn’t have a steep drop.
While riding the longboard or skateboard downhill, you should not push the first few times. Instead, you should allow gravity to pull you down. Then you will be able to try pushing for one time and then riding downwards. You will be able to increase the overall speed depending on your level of comfort as you ride.
How to stop on a longboard or skateboard
Now you are aware of how to ride the longboard or skateboard. Along with that, you should learn how to stop on a longboard or skateboard as well.
Foot breaking is the best method available for you to stop the longboard or skateboard. This is all about dragging your foot. In order to do that, you should take the foot that you are using to push and drag it on the pavement. You should do that until you come into a gentle stop. While you are dragging the foot, you need to keep the bottom of it flat on the ground. It will take some time for you to practice this technique. Once you are done with practicing, you are encouraged to go ahead with the advanced methods of stopping. Coleman slide is a perfect example for such an advanced stopping method.
You should also learn how to stop on a longboard or skateboard while you are traveling too fast. Then you will notice that the longboard or skateboard is getting out of control as well. In such a situation, you will have to bail by jumping away from the longboard or skateboard. This may sound like a reckless thing to do, but it is not. The main objective in here is to leap off from your longboard or skateboard and hit the ground. Then you will be able to remain on the feet.
It is better if you can practice this as well. In order to practice, you should locate a flat area. Then you will be able to keep on moving without going too quickly. This method will take quite some time for you to practice as well. Therefore, you are strongly encouraged to wear protective pads and keep on going slowly.
How to turn on a skateboard or longboard
Now you are familiar with how to start and stop the longboard or skateboard. Therefore, you should move to the next lesson, which is on how to turn on a skateboard or longboard.
The best method available to turn the skateboard or longboard is to use your body weight. You will be able to align the bodyweight accordingly so that you can turn the board. The board would lean in the same way as the weight of your body. You will also be able to carve on the heel edge or toe edge. If you can go for a deeper carving, you will be able to get an extreme turn. This can be fun. However, you should do it while ensuring your protection at all times.
You can learn how to carve gently while you are riding down a slope as well. You can get started off by receiving some forward momentum. Then you will be able to lean to one side and start turning. Carving has got the ability to slow you down. Therefore, you need to provide a stronger push to keep you moving forward.
You will need to keep on moderating the speed as well. This can be done from carving side to side as you cruise forward. Then you will notice that your speed is increasing. The main objective in here is to keep the center of gravity low as much as possible. It will help you to secure a stable ride at all times.
The beginners often keep watching their feet as they carve. You should never do it. That’s because your longboard or skateboard goes in the direction of your eyes. Therefore, you should keep looking at your front at all times.
Carving on a hill
When you are familiar with the basics of turning the longboard or skateboard, you can go ahead with carving on a hill. This can be challenging, but the experience that you get out of it is totally worth. You should practice slowly on a hill. You need to make sure that there is no traffic on the hill as well. That’s because you are going to develop more speed.
The basic carving techniques would apply in here as well. However, you will be doing that while retaining a higher speed. That’s why it is important for you to learn how to carve on a hill effectively.
Now you are aware of how to ride a longboard or skateboard. This is a fun-filled experience that you can grab. You will fall in love with everything that comes along with the experience. Hence, you are strongly encouraged to take a look at it and keep on moving forward. You will love what it can provide to you as well.
Last Updated on
Recumbent Bike Before And After Results Sharing personal experiences has never been my thing. However, about four years ago, that changed. After giving birth to my girl, I found it...
Proper body workout is very important. It boosts your immunity and puts you in great shape. One way to get this type of experience is to use the best Marcy recumbent exercise bike. But which Marcy...